No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-address static ac-list ipv6

ap-address static ac-list ipv6


The ap-address static ac-list ipv6 command configures an AC IPv6 address list on APs.

The undo ap-address static ac-list command deletes the configured AC IPv6 address list on APs.

By default, no AC IPv6 address list is configured on APs.


ap-address static ac-list ipv6 ipv6-address &<1-4>

undo ap-address static ac-list


Parameter Description Value
ipv6-address Specifies the AC' IPv6 address. The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.


System view

Default Level

2: Configuration level

Usage Guidelines

Use Scenario

You can run this command to configure an AC IPv6 address list on APs. After this list is configured, the APs can unicast a Discovery Request packet to discover an AC when they go online using IPv6 addresses.

Follow-up Procedure

Run the reboot command to restart the APs.


# Set the AC's IPv6 address to 1002::0001 on the AP.

<Huawei> system-view
[Huawei] ap-address static ac-list ipv6 1002::1
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 129263

Downloads: 103

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next