No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FITAP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
info-center trapbuffer size

info-center trapbuffer size

Function

The info-center trapbuffer size command sets the maximum number of traps in the trap buffer.

The undo info-center trapbuffer size command restores the default maximum number of traps in the trap buffer.

By default, a trap buffer allows a maximum of 256 traps.

Format

info-center trapbuffer size trapbuffer-size

undo info-center trapbuffer size

Parameters

Parameter Description Value
trapbuffer-size Specifies the maximum number of traps in the trap buffer. The value is an integer that ranges from 0 to 1024. If trapbuffer-size is 0, traps are not displayed.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The info-center trapbuffer size command sets the maximum number of traps in the trap buffer.

Prerequisites

The AP has been enabled to output traps to the trap buffer by using the info-center trapbuffer command.

Precautions

When you run the info-center trapbuffer size command multiple times, only the latest configuration takes effect.

If a small value of trapbuffer-size is used, some traps may be not displayed. If a large value of trapbuffer-size is used, repeated traps may be displayed. The default value of trapbuffer-size is recommended.

Example

# Set the maximum number of traps in the trap buffer to 30.

<Huawei> system-view
[Huawei] info-center trapbuffer size 30
Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100064353

Views: 89164

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next