No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
matched upper-view

matched upper-view

Function

The matched upper-view command allows the system to search for the undo command in the upper view, and returns to the upper view.

The undo matched upper-view command prohibits the system from searching for the undo command in the upper view.

By default, the system does not search for the undo command in the upper view.

Format

matched upper-view

undo matched upper-view

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

When you run the undo command in a view, which is not registered in the current view, the system searches for the command in the upper view if the system is allowed to search for the undo command in the upper view. If the system finds the same undo command, the system executes this command in the upper view. If the system does not find the same undo command in the upper view, the system continues to search for this command in other upper views till the system view.

Running this command brings security risks. For example, if you run the undo ospf command in the interface view, while this command is not registered in the interface view, the system automatically searches for it in the upper view, that is, the system view. In this manner, the system disables the OSPF feature globally.

The matched upper-view command is valid only for current login users who run this command.

Example

# Allow the undo command to be searched for in the upper view.

<Huawei> system-view
[Huawei] matched upper-view
[Huawei] interface gigabitethernet 0/0/1
[Huawei-GigabitEthernet0/0/1] undo ftp client-source
Info: The source address of FTP client is 0.0.0.0.
[Huawei]

# Prohibit the undo command from being searched for in the upper view.

<Huawei> system-view
[Huawei] undo matched upper-view
[Huawei] interface gigabitethernet 0/0/1
[Huawei-GigabitEthernet0/0/1] undo ftp client-source
                                    ^
Error: Unrecognized command found at '^' position.
[Huawei-GigabitEthernet0/0/1]
Related Topics
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 106632

Downloads: 81

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next