No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FITAP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display capwap configuration

display capwap configuration

Function

The display capwap configuration command displays the CAPWAP configuration.

Format

display capwap configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run this command to view the interval for sending Keepalive packets, number of times for sending Keepalive packets, and priority of CAPWAP management packets.

Precautions

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this command.

Example

# Display the CAPWAP configuration.

<Huawei> display capwap configuration
  ------------------------------------------------------------
  Source ip-address                           : -
  Echo interval(seconds)                      : 15
  Echo times                                  : 6
  Control priority(server to client)          : 7
  Control priority(client to server)          : 7
  Control-link DTLS encrypt                   : disable
  DTLS PSK value                              : ******
  PSK mandatory match switch                  : enable
  ------------------------------------------------------------
Table 7-3  Description of the display capwap configuration command output

Item

Description

Source ip-address

AC's source address.

Echo interval(seconds)

Interval for sending Keepalive packets.

Echo times

Number of times for sending Keepalive packets. If the AC or APs receive no response from each other after the Keepalive packets are sent for the specified number of times, the AC or APs consider that they are disconnected from their peer devices.

Control priority(server to client)

Priority of CAPWAP management packets from an AC to an AP.

Control priority(client to server)

Priority of CAPWAP management packets from an AP to an AC.

Control-link DTLS encrypt

Whether CAPWAP control tunnel encryption using DTLS is enabled.

DTLS PSK value

PSK for DTLS encryption.

PSK mandatory match switch

Whether an AP is enabled to perform DTLS sessions with the AC using the default PSK.

Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100064353

Views: 88339

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next