No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mac-address total-number

display mac-address total-number

Function

The display mac-address total-number command displays the number of MAC address entries of a specified type.

Format

display mac-address total-number

display mac-address total-number [ vlan vlan-id | interface-type interface-number ] *

display mac-address total-number vlan all

display mac-address total-number blackhole [ vlan vlan-id ]

display mac-address total-number dynamic [ vlan vlan-id | interface-type interface-number ] *

display mac-address total-number static [ vlan vlan-id | interface-type interface-number ] *

Parameters

Parameter

Description

Value

dynamic

Displays the number of dynamic MAC address entries.

-

blackhole

Displays the number of blackhole MAC address entries.

-

static

Displays the number of static MAC address entries.

-

vlan vlan-id

Displays the number of MAC address entries in a specified VLAN.

The value is an integer that ranges from 1 to 4094.

vlan all

Displays the number of MAC address entries in all VLANs.

-

interface-type interface-number

Displays the number of MAC address entries learned by a specified interface.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The MAC address table of the wireless access point stores MAC addresses of other devices. When forwarding an Ethernet frame, the wireless access point searches the MAC address table for the outbound interface according to the destination MAC address and VLAN ID in the Ethernet frame.

When the wireless access point has many MAC address entries of different types, you can use the display mac-address total-number command to view statistics on MAC address entries of a specified type.

Precautions

If no parameter is specified, the total number of MAC address entries in the system is displayed.

If interface-type interface-number is not specified, the total number of MAC addresses learned by all interfaces is displayed.

If vlan vlan-id is not specified, the total number of MAC addresses in all VLANs is displayed.

Example

# Display the number of dynamic MAC address entries.

<Huawei> display mac-address total-number dynamic
Info: total number of mac-address is : 20 
Table 6-7  Description of the display mac-address total-number command output

Item

Description

Info: total number of mac-address

Total number of MAC address entries in the system.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 90147

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next