No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tftp-server acl

tftp-server acl


The tftp-server acl command specifies the ACL number for the local device so that the device can access TFTP servers with the same ACL number.

The undo tftp-server acl command deletes the ACL number from the local device.

By default, no ACL number is specified on the local client.


tftp-server acl acl-number

undo tftp-server acl


Parameter Description Value
acl-number Specifies the number of the basic ACL. The value is an integer that ranges from 2000 to 2999.


System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To ensure the security of the local device, you need to run the tftp-server acl command to specify an ACL to specify TFTP servers that the local device can access.


The TFTP supports only the basic ACL whose number ranges from 2000 to 2999.


# Allow the local device to the access the TFTP server whose ACL number is 2000.

[Huawei] tftp-server acl 2000
Related Topics
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 125937

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next