No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
info-center channel

info-center channel

Function

The info-center channel command configures channels for outputting information in various directions.

The undo info-center channel command restores the default settings.

By default, the system outputs information in various directions through channels listed in the table below.

Table 4-31  Default association between the channel number, channel name, and output direction of information channels

Channel Number

Channel Name

Output Direction

0

console

Console

1

monitor

User terminal

2

loghost

Log host

3

trapbuffer

Trap buffer

4

logbuffer

Log buffer

5

channel5

Unspecified

6

channel6

Unspecified

7

channel7

Unspecified

8

channel8

Unspecified

9

channel9

Log file

Format

info-center { console | logbuffer | logfile | monitor | trapbuffer } channel { channel-number | channel-name }

undo info-center { console | logbuffer | logfile | monitor | trapbuffer } channel

Parameters

Parameter Description Value
console Specifies the channel used to output information to the console. -
logbuffer Specifies the channel used to output information to the log buffer. -
logfile Specifies the channel used to output information to the log file. -
monitor Specifies the channel used to output information to the user terminal. -
trapbuffer Specifies the channel used to output information to the trap buffer. -
channel-number Specifies the channel number. The value is an integer ranging from 0 to 9.
channel-name Specifies the name of a channel, which can be the default channel name or a user-defined name. The value is a string of 1 to 30 case-sensitive characters. The value consists of letters or numbers and must start with a letter.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

You can run the info-center channel command in the following scenarios: The same information is sent to different directions.

NOTE:
For details on how to configure a channel for outputting information to a log host, see info-center loghost.

Example

# Configure the channel used to output information to a console.

<Huawei> system-view
[Huawei] info-center console channel console

# Configure the channel used to output information to the log buffer.

<Huawei> system-view
[Huawei] info-center logbuffer channel logbuffer

# Configure the channel used to output information to the log file.

<Huawei> system-view
[Huawei] info-center logfile channel 9

# Configure the channel used to output information to the user terminal.

<Huawei> system-view
[Huawei] info-center monitor channel monitor

# Configure the channel used to output information to the trap buffer.

<Huawei> system-view
[Huawei] info-center trapbuffer channel trapbuffer
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 107893

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next