No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display sftp-client

display sftp-client

Function

The display sftp-client command displays the source IP address configured for the SFTP client.

Format

display sftp-client

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display sftp client command to display the source IP address of the SFTP client. By default, the source IP address is 0.0.0.0 if sftp client-source is not configured.

Example

# Display the source IP address configured for the SFTP client.

<Huawei> display sftp-client
Info: The source address of SFTP client is 1.1.1.1
Table 2-21  Description of the display sftp-client command output

Parameter

Description

Info: The source address of SFTP client is 1.1.1.1

1.1.1.1 is the source IP address of the SFTP client.

You can run the sftp client-source command to configure the source IP address for the SFTP client.

If the IP address is configured for the source port, the message "The source interface of SFTP client is LoopBack0" is displayed.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 154630

Downloads: 126

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next