No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radius-attribute translate

display radius-attribute translate

Function

The display radius-attribute translate command displays the RADIUS attribute translation configuration.

NOTE:

Only branch APs support this command.

Format

display radius-attribute [ template template-name ] translate

Parameters

Parameter

Description

Value

template template-name

If this parameter is not specified, the disabled RADIUS attributes translation configuration in all the RADIUS server templates are displayed.

The value must be an existing RADIUS server template name.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring the device to translate RADIUS attributes, run the display radius-attribute translate command to check the configuration.

Example

# Display the RADIUS attribute translation configuration.

<Huawei> display radius-attribute translate
Packet-Type: Type of the RADIUS packets to be modified. 1 indicates valid; 0 indicates invalid. Bit 1 to bit 4 indicate the authentication request, authentication accept, accounting request, and accounting response packets.   

Server-template-name: rds                                                       
--------------------------------------------------------------------------------
Source-Vendor-ID Source-Sub-ID Dest-Vendor-ID Dest-Sub-ID  Direct    Packet-Type
--------------------------------------------------------------------------------
0                6             0              40           receive    0 0 0 0   
--------------------------------------------------------------------------------
Server-template-name: eee                                                       
--------------------------------------------------------------------------------
Source-Vendor-ID Source-Sub-ID Dest-Vendor-ID Dest-Sub-ID  Direct    Packet-Type
--------------------------------------------------------------------------------
234567           123           2011           20           --         0 1 0 1   
--------------------------------------------------------------------------------
Table 13-15  Description of the display radius-attribute translate command output

Item

Description

Server-template-name

Server template name.

Source-Vendor-ID

Vendor ID of the source attribute.

Source-Sub-ID

ID of the source attribute's sub-attribute.

Dest-Vendor-ID

Vendor ID of the destination attribute.

Dest-Sub-ID

ID of the destination attribute's sub-attribute.

Direct

Direction in which the attribute is translated.
  • receive: Translates RADIUS attributes for received packets.
  • send: Translates RADIUS attributes for sent packets.

Packet-Type

Type of RADIUS packets.
  • 0: The RADIUS attributes of this type of packets are not translated.
  • 1: The RADIUS attributes of this type of packets are translated.
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 107988

Downloads: 84

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next