No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
arp-proxy inner-sub-vlan-proxy enable

arp-proxy inner-sub-vlan-proxy enable

Function

The arp-proxy inner-sub-vlan-proxy enable command enables intra-VLAN proxy ARP.

The undo arp-proxy inner-sub-vlan-proxy enable command disables intra-VLAN proxy ARP.

By default, intra-VLAN proxy ARP is disabled.

Format

arp-proxy inner-sub-vlan-proxy enable

undo arp-proxy inner-sub-vlan-proxy enable

Parameters

None

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

If host isolation is configured on the wireless access point, you need to configure intra-VLAN proxy ARP to allow hosts to communicate in a VLAN.

Example

# Enable intra-VLAN proxy ARP on VLANIF 10.

<Huawei> system-view
[Huawei] interface vlanif 10
[Huawei-Vlanif10] arp-proxy inner-sub-vlan-proxy enable
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 92557

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next