No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display arp-limit

display arp-limit

Function

The display arp-limit command displays the maximum number of ARP entries that an interface can dynamically learn.

Format

display arp-limit [ interface interface-type interface-number ] [ vlan vlan-id ]

Parameters

Parameter

Description

Value

interface interface-type interface-number

Specifies the type and number of an interface. Where,
  • interface-type specifies the interface type.

  • interface-number specifies the interface number.

-

vlan vlan-id

Specifies a VLAN ID.

The value is an integer that ranges from 1 to 4094.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the maximum number of ARP entries that an interface can dynamically learn is set, you can run this command to check the configuration.

If interface interface-type interface-number and vlan vlan-id are specified, you can view the maximum number of ARP entries that the specified interface can dynamically learn in the specified VLAN. If the two parameters are not specified, the maximum number of ARP entries that an interface can dynamically learn is displayed.

Example

# Display the number of ARP entries that an interface can dynamically learn.

<Huawei> display arp-limit
 Interface               LimitNum        VlanID          LearnedNum(Mainboard)
---------------------------------------------------------------------------
 GigabitEthernet0/0/1    1000            10                 0
 Vlanif100               1000            0                  0 
---------------------------------------------------------------------------
 Total:2  
Table 13-47  Description of the display arp-limit command output

Item

Description

Interface

Interface name.

LimitNum

Maximum number of ARP entries that an interface can dynamically learn.

VlanID

ID of the VLAN that the interface belongs to.

LearnedNum(Mainboard)

Number of ARP entries that an interface has learned.

Related Topics
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 92172

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next