No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tcp max-mss

tcp max-mss

Function

The tcp max-mss command sets the maximum MSS value for a TCP connection.

The undo tcp max-mss command deletes the maximum MSS value of a TCP connection.

By default, the maximum MSS value is not configured for TCP connections.

Format

tcp max-mss mss-value

undo tcp max-mss

Parameters

Parameter Description Value
mss-value Specifies the maximum MSS value for a TCP connection. The value is an integer ranging from 32 to 9600, in bytes.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To establish a TCP connection, the MSS value is negotiated, which indicates the maximum length of packets that the local device can receive. This length is the TCP payload length, excluding that of the TCP header. If the path MTU is unavailable on one end of a TCP connection, this end cannot adjust the TCP packet size based on the MTU. As a result, this end may send TCP packets that are longer than the MTUs on intermediate devices, which will discard these packets. To prevent this problem, run the tcp max-mss command on either end of a TCP connection to set the maximum MSS value of TCP packets. Then the MSS value negotiated by both ends will not exceed this maximum MSS value, and accordingly TCP packets sent from both ends will not be longer than this maximum MSS value and can travel through the intermediate network.

Precautions

The maximum MSS value configured using the tcp max-mss command must be greater than the minimum MSS value configured using the tcp min-mss command.

Example

# Set the maximum MSS value for a TCP connection to 1024 bytes.

<Huawei> system-view
[Huawei] tcp max-mss 1024
Related Topics
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 126171

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next