No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FITAP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
info-center logbuffer

info-center logbuffer

Function

The info-center logbuffer command enables the AP to send logs to the log buffer.

The undo info-center logbuffer command disables the AP from sending logs to the log buffer.

By default, the AP is enabled to send logs to the log buffer.

Format

info-center logbuffer [ channel { channel-number |channel-name } | size buffer-size ] *

undo info-center logbuffer [ channel | size ]

Parameters

Parameter

Description

Value

channel channel-number

Specifies the number of the channel outputting logs to the log buffer.

The value is an integer ranging from 0 to 9, which indicates that the system has ten channels to output logs to the log buffer.

channel channel-name

Specifies the name of the channel outputting logs to the log buffer.

The name is a string of 1 to 30 case-insensitive characters, spaces not supported.

size buffer-size

Sets the size of the log buffer. buffer-size specifies the number of messages stored in the log buffer.

The value is an integer that ranges from 0 to 1024. The default value is 512.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

To view logs in the log buffer, run the info-center logbuffer command to enable the AP to send logs to the log buffer.

Example

# Enable the AP to send logs to the log buffer.

<Huawei> system-view
[Huawei] info-center logbuffer
Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100064353

Views: 89499

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next