No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FITAP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
terminal logging

terminal logging

Function

The terminal logging command enables log display on the user terminal.

The undo terminal logging command disables log display on the user terminal.

By default, log display is enabled on the user terminal.

Format

terminal logging

undo terminal logging

Parameters

None

Views

User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To view logs on a terminal, run the terminal logging command to enable log display on the user terminal.

Prerequisites

The terminal monitor command has been executed to enable display of logs, traps, and debugging message output on the user terminal.

Example

# Disable log display on the user terminal.

<Huawei> undo terminal logging
Info: Current terminal logging is off.
Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100064353

Views: 88656

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next