No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display telnet-client

display telnet-client

Function

The display telnet-client command displays the source parameters when the device works as a Telnet client.

Format

display telnet-client

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After setting source parameters of the Telnet client, you can run this command to check the setting result. If you have not set telnet client-source, the default source IP address is 0.0.0.0.

Example

# Display the source parameters for the device that works as a Telnet client.

<Huawei> display telnet-client
 The source address of telnet client is 1.1.1.1
Table 2-14  Description of the display telnet-client command output

Item

Description

The source address of telnet client is 1.1.1.1

The source IP address of the Telnet client is 1.1.1.1.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 126408

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next