No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display fib next-hop

display fib next-hop

Function

The display fib next-hop command displays FIB entries that match a specified next-hop IP address.

Format

display fib next-hop ip-address

Parameters

Parameter Description Value
ip-address Specifies the next-hop IP address. The value is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display FIB entries that match a specified next-hop IP address.

<Huawei> display fib next-hop 10.1.1.1
Destination/Mask   Nexthop         Flag TimeStamp     Interface      TunnelID
10.1.1.1/32        10.1.1.1        HU   t[115]        Vlanif10         0x0
Table 6-69  Description of the display fib next-hop command output

Item

Description

Destination/Mask

Destination address or mask length.

Nexthop

Next hop.

Flag

Current flag, which is the combination of G, H, U, S, D, and B.
  • G (gateway route): indicates that the next hop is a gateway.

  • H (host route): indicates that the route is a host route.

  • U (available route): indicates that the route status is Up.

  • S: indicates a static route.

  • D: indicates a dynamic route.

  • B (blackhole route): indicates that the next hop is a null interface.

TimeStamp

Timestamp, which indicates the lifetime of an entry, in seconds.

Interface

Outbound interface to the destination address.

TunnelID

Index of a forwarding entry. It is used in packet forwarding between the upstream and downstream boards. If the value is not 0, packets matching the entry are forwarded through the MPLS tunnel. If the value is 0, packets matching the entry are not forwarded through the MPLS tunnel.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 151637

Downloads: 125

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next