No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
l2-topology detect enable

l2-topology detect enable

Function

The l2-topology detect enable command enables Layer 2 topology detection.

The undo l2-topology detect enable command disables Layer 2 topology detection.

By default, Layer 2 topology detection is disabled.

Format

l2-topology detect enable

undo l2-topology detect enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After the l2-topology detect enable command is run, all ARP entries in the VLAN are updated if the Layer 2 interface changes from Down to Up.

Example

# Enable Layer 2 topology detection.

<Huawei> system-view
[Huawei] l2-topology detect enable
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 90434

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next