No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
anti-attack abnormal enable

anti-attack abnormal enable

Function

The anti-attack abnormal enable command enables defense against malformed packet attacks.

The undo anti-attack abnormal enable command disables defense against malformed packet attacks.

The anti-attack abnormal disable command disables defense against malformed packet attacks.

By default, defense against malformed packet attacks is enabled.

Format

anti-attack abnormal enable

undo anti-attack abnormal enable

anti-attack abnormal disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The malformed packet attack is to send malformed IP packets to the system. If such an attack occurs, the system may break down when processing the malformed IP packets. To prevent the system from breaking down and to ensure normal network services, run the anti-attack abnormal enable command to enable defense against malformed packets.

The device detects malformed packets after defense against malformed packets is enabled.

The device directly discards packets of the following types:

  • Flood attacks from IP null payload packets

  • Attacks from IGMP null payload packets

  • LAND attacks

  • Smurf attacks

  • Attacks from packets with invalid TCP flag bits

Precautions

You can also run the anti-attack enable command in the system view to enable attack defense against all attack packets including malformed packets.

Example

# Enable defense against malformed packet attacks.

<Huawei> system-view
[Huawei] anti-attack abnormal enable
Related Topics
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 131764

Downloads: 105

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next