No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mac-address aging-time

display mac-address aging-time


The display mac-address aging-time command displays the aging time of dynamic MAC address entries in the MAC address table.


display mac-address aging-time




All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

This command displays the aging time of dynamic MAC address entries on the wireless access point. You can check whether the aging time is suitable for network requirements and device performance.

Follow-up Procedure

If the aging time is unsuitable for requirements or device performance, run the mac-address aging-time command to set the aging time properly.


If the aging time is 0, dynamic MAC addresses will not be aged out. In this case, MAC address entries increase sharply and the MAC address table will be full quickly.


# Display the aging time of dynamic MAC address entries.

<Huawei> display mac-address aging-time
  Aging time: 300 second(s)
Table 6-2  Description of the display mac-address aging-time command output



Aging time

Aging time of dynamic MAC address entries, in seconds. To set the aging time, run the mac-address aging-time command.

Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 134316

Downloads: 108

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next