No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tcp window

tcp window

Function

The tcp window command configures the size of the receive or send buffer of a connection-oriented socket.

The undo tcp window command restores the default size of the receive or send buffer of a connection-oriented socket.

By default, the size of the receive or send buffer of a connection-oriented socket is 8K bytes.

Format

tcp window window-size

undo tcp window

Parameters

Parameter Description Value
window-size Specifies the size of the receive or send buffer of a connection-oriented socket. The value is an integer that ranges from 1 to 32, in K bytes. The default value is 8K bytes.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If you run this command in the same view for multiple times, only the last configuration takes effect.

You are advised to configure this parameter under the supervision of technical support personnel.

Example

# Set the size of the receive or send buffer of a connection-oriented socket to 3K bytes.

<Huawei> system-view
[Huawei] tcp window 3
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 158269

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next