No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display arp learning strict

display arp learning strict

Function

The display arp learning strict command displays strict ARP learning globally and on all interfaces.

Format

display arp learning strict

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After strict ARP learning is configured, you can run this command to check the configuration.

Example

# Display strict ARP learning globally and on all interfaces.

<Huawei> display arp learning strict
The global configuration:arp learning strict
 Interface                           LearningStrictState
------------------------------------------------------------
 Vlanif100                           force-disable
 Vlanif200                           force-enable
------------------------------------------------------------
 Total:2
 Force-enable:1
 Force-disable:1
Table 13-45  Description of the display arp learning strict command output

Item

Description

The global configuration

Global strict ARP learning. The value arp learning strict indicates that strict ARP learning has been enabled. If the parameter is left blank, strict ARP learning is disabled.

You can run the arp learning strict (system view) command to enable strict ARP learning.

Interface

Interface name.

LearningStrictState

Strict ARP learning.
  • The value force-enable indicates that strict ARP learning is enabled.
  • The value force-disable indicates that strict ARP learning is disabled.

You can run the arp learning strict (interface view) command to enable strict ARP learning.

Total

Total number of interfaces to which strict ARP learning is applied.

Force-enable:1

Number of the interfaces on which strict ARP learning is enabled.

Force-disable:1

Number of the interfaces on which strict ARP learning is disabled.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 127023

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next