No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
debugging

debugging

Function

The debugging command enables the debugging function of the FTP client.

The undo debugging command disables the debugging function of the FTP client.

By default, the debugging function of the FTP client is disabled.

Format

debugging

undo debugging

Parameters

None

Views

FTP client view

Default Level

3: Management level

Usage Guidelines

You can run the debugging command to check the session information sent by the FTP client to the FTP server.

Example

# Enable the debugging function of the FTP client.

<Huawei> ftp 10.1.1.1
Trying 10.1.1.1 ...
Press CTRL + K to abort
Connected to 10.1.1.1.
220 FTP service ready.
User(10.1.1.1:(none)):ftp
331 Password required for ftp.
Enter password:
230 User logged in.
[ftp] debugging
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 125394

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next