No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display upgrade failure-reason

display upgrade failure-reason

Function

The display upgrade failure-reason command displays the reasons for the latest upgrade failure.

NOTE:

Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN, AP5010DN-AGN support this command.

Format

display upgrade failure-reason

Parameters

None

Views

System view

Default Level

1: Monitoring level

Usage Guidelines

Run the display upgrade failure-reason command to check causes of upgrade failures so that you can take corresponding measures to fix the error.

Table 2-32  Causes of upgrade failures
Message Description
Error: Upgrade failed by getting data. Failure in obtaining the upgrade data.
Error: Upgrade failed by decrypting password. Failure in decrypting the password.
Error: Upgrade failed by configuring ip address. Failure in configuring the IP address for the AP.
Error: Upgrade failed by downloading version file. Failure in downloading the upgrade file. If this error message is displayed, check network connections and ensure that the fat AP can communicate with the server.
Error: Upgrade failed by version mismatched. Unmatched versions. If this error message is displayed, check whether the version file name is modified.
Error: Upgrade failed by invalid version filename. Invalid file name. If this error message is displayed, check whether the version file name is modified.
Error: Upgrade failed by type mismatched. Unmatch between the upgrade file and AP type. If this error message is displayed, check whether the upgrade file is correct.
Error: Upgrade failed by md5 or crc check. CRC error. If this message is displayed, check whether data is modified or lost during transmission.
Error: Upgrade failed by writing flash. Failure in writing the upgrade file into the flash memory.
Error: Upgrade failed by resetting factory configuration. Failure in restoring the factory settings.
Error: Upgrade failed by other reasons. Other causes.
Info: Upgrade successfully. Successful upgrade.

Example

# Display the reasons for the latest upgrade failure.

<Huawei> system-view
[Huawei] display upgrade failure-reason
Info: Connecting to remote server failed!
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 106604

Downloads: 81

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next