No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
authentication-scheme (branch AP group view)

authentication-scheme (branch AP group view)

Function

The authentication-scheme command configures the authentication scheme for a branch AP group.

The undo authentication-scheme command restores the default authentication scheme setting of a branch AP group.

By default, no authentication scheme is configured for a branch AP group.

Format

authentication-scheme authentication-scheme-name

undo authentication-scheme

Parameters

Parameter

Description

Value

authentication-scheme-name

Specifies the name of an authentication scheme.

The authentication scheme must already exist.

Views

Branch AP group view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To enable STAs on the branch AP to be authenticated when the branch AP is disconnected from the AC, enable local authentication on the branch AP. You can specify the authentication scheme for a branch AP using the authentication-scheme authentication-scheme-name command. Branch APs in the same branch AP group must use the same authentication scheme.

Precautions

After the authentication scheme is delivered to the AP, the scheme name is automatically changed to flex_default and the scheme is bound to the default domain by default.

Example

# Set the authentication scheme of the branch AP group g1 to scheme1.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] authentication-scheme scheme1
[Huawei-aaa-authen-scheme1] authentication-mode local
[Huawei-aaa-authen-scheme1] quit
[Huawei-aaa] quit
[Huawei] wlan
[Huawei-wlan-view] branch-group name g1
[Huawei-wlan-branch-group-g1] authentication-scheme scheme1
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 91268

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next