No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display voice-aware-list

display voice-aware-list

Function

The display voice-aware-list command displays voice session information about a specified STA or on a specified radio of an AP.

Format

Central AP: display voice-aware-list { ap-name ap-name radio radio-id | sta-mac mac-address }

Common AP: display voice-aware-list { radio radio-id | sta-mac mac-address }

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies the name of the AP to be queried.

The AP name must exist.

radio radio-id

Specifies the radio ID of an AP.

The radio ID must exist.

sta-mac mac-address

Specifies the MAC address of the STA to be queried.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits. The MAC address cannot be FFFF-FFFF-FFFF, 0000-0000-0000, or a multicast MAC address.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If a user makes voice calls after dynamic optimization is configured for voice traffic and the configuration is successfully delivered, you can run the display voice-aware-list command to check the voice session information.

Example

# Central AP: Display voice session information on radio 0 of AP area_0.
<Huawei> display voice-aware-list ap-name area_0 radio 0
-------------------------------------------------------------------------------
Protocol    Source  IP/Port        Destination IP/Port
-------------------------------------------------------------------------------
rtpaudio    192.168.253.253/50943  192.168.11.1/21 
-------------------------------------------------------------------------------
Total : 1
# Common AP: Display voice session information on radio 0.
<Huawei> display voice-aware-list radio 0
-------------------------------------------------------------------------------
Protocol    Source  IP/Port        Destination IP/Port
-------------------------------------------------------------------------------
rtpaudio    192.168.253.253/50943  192.168.11.1/21 
-------------------------------------------------------------------------------
Total : 1
Table 14-4  Description of the display voice-aware-list command output
Item Description
Protocol Voice protocol type.
Source IP/Port Source IP address and port number of the session.
Destination IP/Port Destination IP address and port number of the session.
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 154893

Downloads: 126

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next