No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The quit command returns from the current view to a lower-level view. If the current view is the user view, this command exits from the system.






All views

Default Level

0: Visit level

Usage Guidelines

Usage Scenario

Three types of views are available and they are listed as follows from a lower level to a higher level:

  • User view

  • System view

  • Service view, such as route protocol view or interface view

Run the quit command to return to a lower-level command view from the current view. If you are in the user view currently, after you run the quit command, you quit from the system.


# Return to the system view from the AAA view, and then return to the user view. After this, quit the system.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] quit
[Huawei] quit
<Huawei> quit
Related Topics
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 129643

Downloads: 103

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next