No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
discard ts

discard ts

Function

The discard ts command discards IP packets with time-stamp options.

The undo discard ts command restores the default configurations.

By default, packets with time-stamp options are processed by the CPU.

Format

discard ts

undo discard ts

Parameters

None

Views

VLANIF interface view, loopback interface view

Default Level

2: Configuration level

Usage Guidelines

When a device receives a huge number of packets with time-stamp options that increase the traffic loads, performance of the device is affected. The discard ts command is used to discard IP packets with time-stamp options, which reduces pressure on CPU and improves network performance and security.

NOTE:

The discard ts command applies to only incoming packets.

Example

# Configure the device to discard the IP packets with time-stamp options.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] discard ts
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 125609

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next