No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
als restart

als restart

Function

The als restart command manually restarts the laser of an interface.

Format

als restart

Parameters

None

Views

XGE interface view, port group view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run this command to manually restart the laser of an optical module. After the optical link recovers, the laser is started after a certain interval if the restart mode is automatic restart. To start the laser immediately after the optical link recovers, set the restart mode of the laser to manual restart and run the als restart command. If this command is not executed, the laser automatically sends a pulse after receiving a pulse from the remote end.

Prerequisites

ALS has been enabled on the interface using the als enable command and the restart mode of the laser has been set to manual restart mode using the als restart mode manual command.

Precautions

This command cannot be executed on an interface if the interface has been added to an interface protection group and is in Protect state.

Example

# Restart lasers on interfaces XGigabitEthernet0/0/1 manually.

<Huawei> system-view
[Huawei] interface xgigabitethernet 0/0/1
[Huawei-XGigabitEthernet0/0/1] als enable
[Huawei-XGigabitEthernet0/0/1] als restart mode manual
[Huawei-XGigabitEthernet0/0/1] als restart
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 154121

Downloads: 126

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next