No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radius-server dead-interval dead-count detect-cycle

display radius-server dead-interval dead-count detect-cycle

Function

The display radius-server dead-interval dead-count detect-cycle command displays configuration information about the RADIUS server detection interval, number of times the RADIUS server detection interval cycles, and maximum number of consecutive unacknowledged packets in each detection interval.

NOTE:

Only branch APs support this command.

Format

display radius-server { dead-interval | dead-count | detect-cycle }

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the RADIUS server detection interval, number of times the RADIUS server detection interval cycles, and maximum number of consecutive unacknowledged packets in each detection interval are configured, you can run the display radius-server { dead-interval | dead-count | detect-cycle } command to check configuration information about the RADIUS server detection interval, number of times the RADIUS server detection interval cycles, and maximum number of consecutive unacknowledged packets in each detection interval.

Example

# Display configuration information about the RADIUS server detection interval.

<Huawei> display radius-server dead-interval
Radius server state detected internal is 5.

# Display configuration information about the maximum number of consecutive packets that are not acknowledged by the RADIUS server in each detection interval.

<Huawei> display radius-server dead-count
Radius server state detected count is 2. 
# Display configuration information about the number of times the RADIUS server detection interval cycles.
<Huawei> display radius-server detect-cycle
Radius server down detect cycle is 2. 
Table 13-17  Description of the display radius-server { dead-interval | dead-count | detect-cycle } command output

Item

Description

Radius server state detected internal is

Detection interval of the current RADIUS server.

Radius server state detected count is

Maximum number of consecutive packets that are not acknowledged by the RADIUS server.

Radius server down detect cycle is Number of times the RADIUS server detection interval cycles.
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 92981

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next