No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display arp statistics

display arp statistics

Function

The display arp statistics command displays ARP entry statistics.

Format

display arp statistics { all | interface interface-type interface-number }

Parameters

Parameter Description Value
all Displays ARP entry statistics of the system. -
interface interface-type interface-number Displays ARP entry statistics of a specified interface. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To monitor ARP entries or locate the faults in ARP, you can run this command to check ARP entry statistics.

Example

# Display ARP entry statistics.

<Huawei> display arp statistics all
Dynamic:1       Static:0
Table 6-28  Description of the display arp statistics all command output

Item

Description

Dynamic

Number of dynamic ARP entries.

Static

Number of static ARP entries.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 126872

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next