No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display traffic-filter applied-record

display traffic-filter applied-record

Function

The display traffic-filter applied-record command displays the record about ACL-based packet filtering.

Format

display traffic-filter applied-record

Parameters

None

Views

All views

Default Level

2: Configuration level

Usage Guidelines

The display traffic-filter applied-record command displays the record about ACL-based packet filtering. The command output helps you check the ACL-based packet filtering configuration and locate faults.

Example

# Display the record about ACL-based packet filtering.

<Huawei> display traffic-filter applied-record
----------------------------------------------------------------------------------------------
Interface                            Direction               AppliedRecord 
----------------------------------------------------------------------------------------------
Wlan-Bss0                            inbound                 IPv4 ACL 4000
Wlan-Bss1                            inbound                 IPv4 ACL 4000
Wlan-Bss16                           inbound                 IPv4 ACL 4000
Wlan-Bss17                           inbound                 IPv4 ACL 4000
---------------------------------------------------------------------------------------------- 
Total:4 
Table 14-1  Description of the display traffic-filter applied-record command output

Item

Description

Interface

Interface to which ACL-based packet filtering is applied.

Direction

Direction in which ACL-based packet filtering is configured:
  • inbound: ACL-based packet filtering is configured in the inbound direction.

  • outbound: ACL-based packet filtering is configured in the outbound direction.

AppliedRecord

Record about ACL-based packet filtering.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 106659

Downloads: 81

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next