No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ip interface

display ip interface

Function

The display ip interface command displays the IP configuration and statistics on interfaces. The statistics include the number of packets and bytes received and sent by interfaces, number of multicast packets sent and received by interfaces, and number of broadcast packets received, sent, forwarded, and discarded by interfaces.

The display ip interface brief command displays brief information about interface IP addresses, including the IP address, subnet mask, physical status, link-layer protocol status, and number of interfaces in different states.

Format

display ip interface [ interface-type interface-number ]

display ip interface brief [ interface-type [ interface-number ] ]

display ip interface brief [ interface-type ] &<1-8>

Parameters

Parameter Description Value
interface-type interface-number

Specifies the type and number of an interface. If no interface is specified, IP configuration and statistics about all interfaces are displayed.

-
brief Displays brief information, including the IP address, subnet mask, physical status, link-layer protocol status, and number of interfaces in different states. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display ip interface brief command to view the following information:
  • IP configurations of all interfaces
  • IP configurations of interfaces of the specified type and a specified interface
  • IP configurations of interfaces that have IP addresses
This command, however, cannot display the IP configurations of Layer 2 interfaces.
NOTE:

Example

# Display IP information about VLANIF15.
<Huawei> display ip interface vlanif 15 
Vlanif15 current state : UP
Line protocol current state : UP
The Maximum Transmit Unit : 1500 bytes
input packets : 766390, bytes : 41540847, multicasts : 681817
output packets : 242239, bytes : 14679482, multicasts : 172333
Directed-broadcast packets:
 received packets:            0, sent packets:            0
 forwarded packets:           0, dropped packets:           0
Internet Address is 10.1.1.119/24
Broadcast address : 10.1.1.255
TTL being 1 packet number:    164035
TTL invalid packet number:         0
ICMP packet input number:          0
  Echo reply:                      0
  Unreachable:                     0
  Source quench:                   0
  Routing redirect:                0
  Echo request:                    0
  Router advert:                   0
  Router solicit:                  0
  Time exceed:                     0
  IP header bad:                   0
  Timestamp request:               0
  Timestamp reply:                 0
  Information request:             0
  Information reply:               0
  Netmask request:                 0
  Netmask reply:                   0
  Unknown type:                    0    
Table 6-45  Description of the display ip interface command output

Item

Description

current state :

Physical status of the interface:
  • UP: indicates that the interface is physically Up.

  • DOWN: indicates that the interface is physically Down.

  • Administratively down: indicates that the administrator has run the shutdown command on the interface.

Line protocol current state :

Link layer protocol status of the interface:
  • UP: The link layer protocol of the interface is running properly.

  • DOWN: The link layer protocol of the interface is Down or no IP address is configured on the interface.

The Maximum Transmit Unit :

MTU of the interface. The default MTU of an Ethernet interface or a serial interface is 1500 bytes. Packets longer than the MTU are fragmented before being transmitted. If fragmentation is not allowed, the packets are discarded.

input packets : 766390, bytes : 41540847, multicasts : 681817

Total number of packets, bytes, and multicast packets received by the interface.

output packets : 242239, bytes : 14679482, multicasts : 172333

Total number of packets, bytes, and multicast packets sent by the interface.

Directed-broadcast packets:

Number of packets broadcast on the interface directly.

received packets:

Total number of received packets.

sent packets:

Total number of sent packets.

forwarded packets:

Total number of forwarded packets.

dropped packets:

Total number of discarded packets.

Internet Address is

IP address assigned to the interface and mask length.

Broadcast address :

Broadcast address of the interface.

TTL being 1 packet number:

Number of packets with TTL 1.

TTL invalid packet number:

Number of packets with invalid TTL.

ICMP packet input number:

Number of received ICMP packets.

Echo reply:

Number of Echo Reply packets.

Unreachable:

Number of Destination Unreachable packets.

Source quench:

Number of Source Quench packets.

Routing redirect:

Number of Redirect packets.

Echo request:

Number of Echo Request packets.

Router advert:

Number of Router Advertisement packets.

Router solicit:

Number of Router Solicitation packets.

Time exceed:

Number of Time Exceeded packets.

IP header bad:

Number of IP header error packets.

Timestamp request:

Number of Timestamp Request packets.

Timestamp reply:

Number of Timestamp Reply packets.

Information request:

Number of Information Request packets.

Information reply:

Number of Information Reply packets.

Netmask request:

Number of Address Mask Request packets.

Netmask reply:

Number of Address Mask Reply packets.

Unknown type:

Number of unknown packets.

Related Topics
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 125925

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next