No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display trace object

display trace object

Function

The display trace object command displays the configuration about a service diagnosis object.

Format

display trace object [ service-object-id ]

Parameters

Parameter Description Value
service-object-id

Specifies the ID of a diagnosis object.

The value is an integer that ranges from 0 to .

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If you do not specify the parameter service-object-id, configurations about all diagnosis objects are displayed.

Example

# Display configurations about all diagnosis objects.

<Huawei> display trace object
Trace Object:
------------------------------------------------------------
  Object ID      : 0
  Slot           : -
  MAC Address    : -
  IP Flag        : -
  Session ID     : -
  IP Address     : 10.1.1.1
  VRF Index      : -
  CID            : -
  User Name      : -
  Interface      : -
  QinQ VLAN ID   : -
  User VLAN ID   : -
  Access Mode    : -
  Output         : command line ( User-Intf 4 )

  Object ID      : 1
  Slot           : -
  MAC Address    : 0101-0101-0101
  IP Flag        : -
  Session ID     : -
  IP Address     : -
  VRF Index      : -
  CID            : -
  User Name      : -
  Interface      : -
  QinQ VLAN ID   : -
  User VLAN ID   : -
  Access Mode    : -
  Output         : file ( flash:/a.txt )

  Object ID      : 2
  Slot           : -
  MAC Address    : 0101-0101-0101
  IP Flag        : -
  Session ID     : -
  IP Address     : 10.2.2.2
  VRF Index      : -
  CID            : -
  User Name      : -
  Interface      : -
  QinQ VLAN ID   : -
  User VLAN ID   : -
  Access Mode    : -
  Output         : server ( 10.10.10.10 )

------------------------------------------------------------
  Total 3, 3 printed
Table 15-14  Description of the display trace object command output

Item

Description

Object ID

ID of the diagnosis object. This parameter is automatically generated from 0 in sequence of creation time.

Slot

Slot ID of the interface board.

MAC Address

MAC address of the interface. To set the MAC address of an interface, run the trace object command.

IP Flag

Flag of the IP address.

Session ID

ID of the session, only valid for PPPoX users.

IP Address

IP address of the interface. To set the IP address of an interface, run the trace object command.

VRF Index

User VRF index.

CID

User connect ID.

User Name

User name. To set the user name, run the trace object command.

Interface

Interface index. To set the interface index, run the trace object command.

QinQ VLAN ID

QinQ VLAN ID. To set the QinQ VLAN ID, run the trace object command.

User VLAN ID

User VLAN ID. To set the user VLAN ID, run the trace object command.

Access Mode

User access mode, including dot1x, mac-authen, portal, and wlan. To set the user access mode, run the trace object command.

Output

Direction in which the device exports diagnosis information. To set the direction, run the trace object command.

  • Command line (User-Intf X): Diagnosis information is displayed on the screen of a configuration terminal.

    NOTE:
    When the configuration terminal is online, X displays the absolute number of the user interface (the absolute number can be checked using the display users command). When the configuration terminal is offline, X displays offline.
  • file: Diagnosis information is exported to files.
  • server: Diagnosis information is exported to a log server.

Total 3, 3 printed

Total number of created diagnosis objects and count of displayed objects.

Related Topics
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 108356

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next