No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display trace information

display trace information

Function

The display trace information command displays information about service diagnosis.

Format

display trace information

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring service diagnosis, you can run this command to view global information about service diagnosis, for example, the counts of diagnosis instances and objects created on the device.

Example

# Display information about service diagnosis.

<Huawei> display trace information
Trace Information:
------------------------------------------------------------
Trace Enable                            : Enable
Debug info level                        : Brief
Debug fill-instance                     : Off
Debug quit-instance                     : Off
Debug output information                : Off
Syslog Source IP Address                : -

The sum of all the instances            : 0
The startID of the instance table       : -
Alloc instance times                    : 9
Free instance times                     : 9
The sum of all the objects              : 2
------------------------------------------------------------
Table 15-12  Description of the display trace information command output

Item

Description

Trace Information

Information about service diagnosis.

Trace Enable

Status of service diagnosis.
  • Disable: Service diagnosis is disabled.
  • Enable: Service diagnosis is enabled.

This field can be modified using the trace enable command.

Debug info level

Output level of service diagnosis information.
  • Brief: brief service diagnosis information.
  • Detail: detailed service diagnosis information.

This field can be modified using the trace enable command.

Debug fill-instance

Debugging status of the fill-instance module.
  • Off: disabled
  • On: enabled

Debug quit-instance

Debugging status of the quit-instance module.
  • Off: disabled
  • On: enabled

Debug output information

Debugging status of the output information module.
  • Off: disabled
  • On: enabled

Syslog Source IP Address

Source IP address of the interface for exporting diagnosis information to the log server. To set the IP address of the interface for exporting diagnosis information to a log server, run the trace syslog source command.

The sum of all the instances

Total number of diagnosis instances.

The startID of the instance table

Start ID of the instance table.

Alloc instance times

Number of the allocated diagnosis instances.

Free instance times

Number of the release diagnosis instances.

The sum of all the objects

Total number of diagnosis objects.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 93168

Downloads: 68

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next