No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display user-interface

display user-interface

Function

The display user-interface command displays information about a user interface.

Format

display user-interface [ ui-type ui-number1 | ui-number ] [ summary ]

Parameters

Parameter Description Value
ui-type Displays information about a specified user interface. The value can be Console or VTY.
ui-number1 Displays information about a user interface with a specified relative number. The minimum value is 0. The maximum value is smaller by 1 than the number of user interfaces the system supports.
ui-number Displays information about a user interface with a specified absolute number.

The value is an integer ranging from 0 to 25. The value varies according to the device type.

summary Displays the summary of a user interface. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Using the display user-interface command, you can view detailed configuration information about all user interfaces or a specified user interface.

NOTE:

Lower-level users cannot gain access to a user interface information about users of higher levels.

Example

# Display detailed information about the user interface with the absolute number 0.

<Huawei> display user-interface 0
  Idx  Type     Tx/Rx      Modem Privi ActualPrivi Auth  Int                    
+ 0    CON 0    9600       -     15    15          P     -                      
  +    : Current UI is active.                                                  
  Idx  : Absolute index of UIs.                                                 
  Type : Type and relative index of UIs.                                        
  Privi: The privilege of UIs.                                                  
  ActualPrivi: The actual privilege of user-interface.                          
  Auth : The authentication mode of UIs.                                        
      A: Authenticate use AAA.                                                  
      N: Current UI need not authentication.                                    
      P: Authenticate use current UI's password.                                
  Int  : The physical location of UIs.

# Display detailed information about all user interfaces.

<Huawei> display user-interface
  Idx  Type     Tx/Rx      Modem Privi ActualPrivi Auth  Int                    
+ 0    CON 0    9600       -     15    15          P     -                      
+ 129  VTY 0               -     0     15          A     -                      
  130  VTY 1               -     0     0           A     -                      
  131  VTY 2               -     0     0           A     -                      
  132  VTY 3               -     0     0           A     -                      
  133  VTY 4               -     0     0           A     -                      
  145  VTY 16              -     0     0           A     -                      
  146  VTY 17              -     0     0           A     -                      
  147  VTY 18              -     0     0           A     -                      
  148  VTY 19              -     0     0           A     -                      
  149  VTY 20              -     0     0           A     -                      
  150  Web 0               -     15    0           A     -                      
  151  Web 1               -     15    0           A     -                      
  152  Web 2               -     15    0           A     -                      
  153  Web 3               -     15    0           A     -                      
  154  Web 4               -     15    0           A     -                      
  155  XML 0               -     0     0           A     -                      
  156  XML 1               -     0     0           A     -                      
  157  XML 2               -     0     0           A     -                      
+ 168  XML 0               -     15    15          N     -                      
UI(s) not in async mode -or- with no hardware support:                          
1-128                                                                           
  +    : Current UI is active.                                                  
  Idx  : Absolute index of UIs.                                                 
  Type : Type and relative index of UIs.                                        
  Privi: The privilege of UIs.                                                  
  ActualPrivi: The actual privilege of user-interface.                          
  Auth : The authentication mode of UIs.                                        
      A: Authenticate use AAA.                                                  
      N: Current UI need not authentication.                                    
      P: Authenticate use current UI's password.                                
  Int  : The physical location of UIs.
Table 2-3  Description of the display user-interface command output

Parameter

Description

+

Active user interface.

Idx

Absolute number of a user interface.

Type

Type and relative number of a user interface.
  • CON: Login through the console port
  • VTY: Login through Telnet or SSH.
  • Web: Login through the web platform
  • XML: Login through the upper-layer NMS, which communicates with the local device using NETCONF

Tx/Rx

Data transfer rate of the user interface.

Modem

Type of the modem. The value - indicates that the hardware does not support the modem.

Privi

Authority configured on a user interface.

ActualPrivi

Actual permission of a user interface. In the case of the AAA authentication mode, the level of a local user in AAA configuration is the actual permission.

Auth

Authentication mode on a user interface.
  • A: AAA authentication.
  • N: No authentication on the current user interface.
  • P: Password authentication.

Int

User interface.

UI(s) not in async mode -or- with no hardware support: 1-128

Interfaces numbered from 1 to 128 are UI interfaces that are working in synchronous mode or are not supported by the hardware. Currently, the WLAN supports only the asynchronous mode.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 91754

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next