No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display als configuration

display als configuration

Function

The display als configuration command displays ALS configuration.

Format

display als configuration slot slot-id

display als configuration interface interface-type interface-number

Parameters

Parameter Description Value
slot slot-id

Displays ALS configuration in a slot with a specified slot ID.

The value is 0.

interface interface-type interface-number
Displays ALS configuration on a specified interface.
  • interface-type specifies the interface type.

  • interface-number specifies the interface number.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display ALS configuration on interfaces XGigabitEthernet0/0/1.

<Huawei> display als configuration interface xgigabitethernet 0/0/1
------------------------------------------------------------------------------- 
Interface               ALS        Laser      Restart    Interval(s)   Width(s) 
                        Status     Status     Mode                              
------------------------------------------------------------------------------- 
XGigabitEthernet0/0/1   Disable    On         Auto       100           2        
Table 4-16  Description of the display als configuration command output

Item

Description

Interface

Interface type and number.

ALS Status

Whether ALS is enabled.
  • Enable: ALS is enabled.

  • Disable: ALS is disabled.

ALS is enabled using the als enable command.

Laser Status

Whether the laser is On.
  • Off: The laser is Off.

  • On: The laser is On.

Restart Mode

ALS restart mode.
  • Auto: automatic restart mode.

  • Manual: manual restart mode.

The ALS restart mode is set to manual using the als restart mode manual command.

Interval(s)

ALS pulse interval, expressed in seconds. The ALS pulse interval is set using the als restart pulse-interval command.

Width(s)

ALS pulse width, expressed in seconds. The ALS pulse width is set using the als restart pulse-width command.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 125604

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next