No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display user-interface maximum-vty

display user-interface maximum-vty


The display user-interface maximum-vty command displays the maximum number of VTY users.


display user-interface maximum-vty




All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display user-interface maximum-vty command to view the maximum number of users who connect to the device using Telnet or SSH. By default, the total number of Telnet users and SSH users is five maximum.


# Display the maximum number of VTY users.

<Huawei> display user-interface maximum-vty
Maximum of VTY user : 5
Table 2-4  Description of the display user-interface maximum-vty command output



Maximum of VTY user

Maximum number of VTY users.

The maximum number of VTY users can be configured using the user-interface maximum-vty command.

Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 131511

Downloads: 105

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next