No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display user-interface maximum-vty

display user-interface maximum-vty

Function

The display user-interface maximum-vty command displays the maximum number of VTY users.

Format

display user-interface maximum-vty

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display user-interface maximum-vty command to view the maximum number of users who connect to the device using Telnet or SSH. By default, the total number of Telnet users and SSH users is five maximum.

Example

# Display the maximum number of VTY users.

<Huawei> display user-interface maximum-vty
Maximum of VTY user : 5
Table 2-4  Description of the display user-interface maximum-vty command output

Parameter

Description

Maximum of VTY user

Maximum number of VTY users.

The maximum number of VTY users can be configured using the user-interface maximum-vty command.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 92307

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next