No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display system-information

display system-information

Function

The display system-information command displays AP system information.

Format

display system-information

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Users can run this command to view AP system information.

Example

# Display AP system information.

<Huawei> display system-information
System Information
===============================================
Serial Number            : 210235554710CA000020
System Time              : 2019-07-01 11:11:42
System Up time           : 18hour 11min 20sec
System Name              : ap-2
Country Code             : CN
MAC Address              : 10:47:80:07:6f:80
Radio 0 MAC Address      : 10:47:80:07:6f:80
Radio 1 MAC Address      : 10:47:80:07:6f:90
IP Address               : 192.168.105.254
Subnet Mask              : 255.255.255.0
Default Gateway          : 192.168.105.1
IPv6 IP Address          :
IPv6 Default Gateway     :
Management VLAN ID(AP)   : 1
IP MODE                  : dhcp
Slot Status              : Dual band(802.11b/g/n;802.11a/n/ac)
AP Type                  : AP5030DN
Board Type               : AP5030DN
Board Serial Number      : 021THJ10CA000040
Board Bom Version        : 0
Boot Rom Version         : 102
Software Version         : V200R010C00
Hardware Version         : H85D2TD1D200 VER.B
Telnet Access            : Enable
User Name                : admin
LED Switch               : ON
Branch group             : huawei
===============================================
Table 4-11  Description of the display system-information command output
Item Description
Serial Number Serial number of the device.
System Time System time when the command is run.
System Up time System running time.
System Name System name.
Country Code Country code of the device.
MAC Address MAC address of the device.
Radio x MAC Address MAC address of the radio.
IP Address IPv4 address of the device.
Subnet Mask Subnet mask of the device.
Default Gateway Default IPv4 gateway of the device.
IPv6 IP Address IPv6 address of the device.
IPv6 Default Gateway Default IPv6 gateway of the device.
Management VLAN ID(AP) ID of the management VLAN.
IP MODE Mode in which the device obtains an IP address. The value can be any of the following:
  • dhcp: The device obtains an IP address in DHCP mode. The AP functions as the DHCP client and obtains an IP address from the DHCP server.
  • slaac: The device obtains an IPv6 address through stateless address autoconfiguration.
  • static: The device obtains an IP address in static mode. You need to configure a static IP address for the AP.
Slot Status Frequency band supported by the device. The value can be either of the following:
  • Single band: The device supports only the 2.4 GHz frequency band.
  • Dual band: The device supports two frequency bands of 2.4 GHz and 5 GHz frequency bands.
  • Triple band: The device supports three frequency bands of 2.4 GHz and 5 GHz.
AP Type AP type.
Board Type Card type.
Board Serial Number Serial number of the card.
Board Bom Version BOM version of the card.
Boot Rom Version BootROM version.
Software Version Version of the system software running on the device.
Hardware Version Hardware version of the device.
Telnet Access Whether Telnet services are enabled.
User Name Current login user.
LED Switch Switch status of the LED indicator.
Branch group Name of the branch AP group when the AP works in a WAN authentication escape scenario.
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 133495

Downloads: 106

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next