No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-group

ap-group

Function

The ap-group command adds an AP to an AP group.

The undo ap-group command deletes an AP from an AP group.

By default, an AP is not added to any AP group.

Format

ap-group name group-name

undo ap-group

Parameters

Parameter

Description

Value

name group-name

Specifies the name of an AP group.

The value is a string of 1 to 35 characters. It does not contain question marks (?), marks (/), or spaces, and cannot start or end with double quotation marks (" ").

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If you need to perform the same configuration on multiple APs, add the APs to an AP group and perform the configuration in the AP group. The configuration takes effect on all APs of the group. This prevents repetitive configuration.

Precautions

  • The configuration takes effect only after the AP is restarted.

Example

# Add an AP to the AP group group1.
<Huawei> system-view
[Huawei] ap-group name group1
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 90787

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next