No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for USB-based Deployment

Licensing Requirements and Limitations for USB-based Deployment

Involved Network Elements

Other network elements are not required.

Licensing Requirements

USB-based deployment is a basic feature of a switch and is not under license control.

Version Requirements

Table 4-1  Products and versions supporting USB-based deployment

Series

Product Model

Software Version

S12700

S12704

V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S12708, S12712

V200R005C00, V200R006C00, V200R007C00, V200R007C20, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S12710

V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

Before USB-based deployment

  • USB-based deployment is mutually exclusive with the SVF and EasyDeploy functions.
  • Before using a USB flash drive to upgrade a device, ensure that the device can start successfully and has sufficient space to store the required files.
  • Devices to be deployed are unconfigured devices and do not have security measures configured. Therefore, when onsite non-professionals perform deployment task, ensure that they do not perform any unauthorized operations on the devices, USB flash drive, and deployment files.

  • Only one USB flash drive can be connected to a device.
  • The USB flash drive must be connected to the master MPU of a device. If it is connected to the standby MPU, the USB-based deployment process will not start. In a cluster, the USB flash drive must be connected to the system master MPU of the cluster.
  • In USB-based deployment scenarios, the devices may be upgraded to V200R009C00 or a later version after restart. In this case, the devices check whether the configuration file for next startup contains WLAN configuration that conflicts with the software package for next startup. If so, the devices cannot restart and the USB-based deployment fails. The error report file usbload_error.txt is generated in the root directory of the USB flash drive, which records the failure causes. To solve this problem, you need to use eDesk to convert the configuration file and then set it as the next startup configuration file.

  • The file system format of the USB flash drive must be FAT32, and standard for the USB interface is USB2.0. USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.

During USB-based deployment

  • Before saving files to a USB flash drive, disable the write-protection function of the USB flash drive.
  • Do not power off the device during a USB-based deployment process. Otherwise, the upgrade fails or the device cannot start.
  • Do not remove the USB flash drive before the USB-based deployment process is complete. Otherwise, data in the USB flash drive may be corrupted.
  • If upgrade files include a configuration file, you are advised to configure an encryption password for the configuration file, and enable HMAC check to enhance security.
  • In USB-based deployment, the deployment may fail because the device configuration is not restored. In this case, you can remove and then install the USB to resolve this problem.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 11021

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next