No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring USB-based Deployment

Example for Configuring USB-based Deployment

Networking Requirements

To reduce labor costs and save time in device deployment, two new devices need to be automatically upgraded and configured. Requirements for the deployment are as follows:
  • The devices need to be upgraded at 02:09 a.m. on July 28, 2013.
  • The first device S12700 needs to be upgraded from V200R013C00 to a later version, and its MAC address is 0018-0303-1234. This device needs to load the new system software package S12700-new.CC and a user-defined file userfile.txt. After the upgrade, the old system software package needs to be deleted.
  • The second device S12700 needs to be upgraded from V200R013C00 to a later version, and its ESN is 020TEA10xxxxxxxx. This device needs to load the new system software package S12700-new.CC, configuration file vrpcfgnew.zip, and path file patch.pat.

Configuration Roadmap

The configuration roadmap is as follows:

  1. Make an index file smart_config.ini.
  2. Save the smart_config.ini file and upgrade files to the root directory of the USB flash drive.
  3. Connect the USB flash drive to a USB port of each device to complete automatic software upgrade.

Procedure

  1. Make an index file.

    # Create an index file and name it smart_config.ini. Add the following content in the index file:

    BEGIN LSW
    [GLOBAL CONFIG]
    TIMESN=20130728.020900
    [DEVICE0 DESCRIPTION]
    MAC=0018-0303-1234
    AUTODELFILE=YES
    DEVICETYPE=S12700
    SYSTEM-SOFTWARE=S12700-new.CC
    SYSTEM-USERDEF1=userfile.txt
    [DEVICE1 DESCRIPTION]
    ESN=020TEA10xxxxxxxx
    DEVICETYPE=S12700
    SYSTEM-SOFTWARE=S12700-new.CC
    SYSTEM-CONFIG=vrpcfgnew.zip
    SYSTEM-PAT=patch.pat
    END LSW
    

  2. Save the smart_config.ini file and upgrade files to the root directory of the USB flash drive.
  3. Connect the USB flash drive to the master MPU of the S12700 to start the deployment process. Observe the USB indicator on the switch to monitor the deployment state.

    After the switch restarts, the system checks the deployment state. If the USB indicator blinks yellow slowly (once every 2s), the USB-based deployment has succeeded. If the USB indicator blinks red fast (twice every 1s), the USB-based deployment has failed. View the usbload_error.txt file in the root directory of the USB flash drive to analyze why the deployment fails.

    If the USB-based deployment succeeds, remove the USB flash drive.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 11803

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next