No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
First Login Through the Console Port

First Login Through the Console Port

You can log in to a switch that is powered on for the first time through the console port from a PC.

Before You Begin

Ensure the following:

  • The switch is powered on.
  • You have a console cable.
  • The terminal emulation software is installed on the PC.

    For details on how to use specific terminal emulation software, see the related software user guide or online help. This section uses the third-party software SecureCRT as an example.

Procedure

  1. Connect the DB9 female connector of the console cable to the serial port (COM) on the PC, and connect the RJ45 connector to the console port on the switch, as shown in Figure 5-1.

    Figure 5-1  Connecting to the switch through the console port

    NOTE:

    If the switch has two main processing units (MPUs), you can log in to the switch through the console port on either of the two MPUs.

    If a maintenance terminal (PC) does not have a DB9 serial port, purchase a USB-to-DB9 cable that has a DB9 male connector with nuts. Connect the DB9 female connector of the console cable to the DB9 male connector, and connect the USB connector to the USB port of the maintenance terminal.

  2. Start the terminal emulation software on the PC. Create a connection, select the port for connection, and set communication parameters.
    1. Click to establish a connection, as shown in Figure 5-2.

      Figure 5-2  Establishing a connection

    2. View port information in Device Manager in the Windows operating system, select the port for connection, and set communication parameters, as shown in Figure 5-3.

      Communication parameters of the terminal emulation software must be consistent with the default attribute settings of the console user interface on the switch.

      Table 5-1  Default settings for the console port
      Parameter Default Setting
      Baud rate 9600 bit/s
      Flow control None
      Parity None
      Stop bits 1
      Data bits 8
      User name admin
      Password admin@huawei.com
      NOTE:

      Because RTS/CTS is selected in the software by default, you need to deselect RTS/CTS; otherwise, you cannot enter commands.

      Figure 5-3  Setting the port for connection and communication parameters

  3. Click Connect. The following information then will be displayed, prompting you to enter the user name and password. The default user name for the first login is admin and the default password is admin@huawei.com. (The following output is only for reference.)

    Login authentication 
    
    
    Username:admin
    Password:
    Warning: The default password poses security risks.
    The password needs to be changed. Change now? [Y/N]: y
    Please enter old password: 
    Please enter new password: 
    Please confirm new password: 
    The password has been changed successfully
    <HUAWEI>
    • After the first login, you must change the default password. For device security purposes, change the password periodically.
    • The password entered in interactive mode is not displayed on the screen.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 11057

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next