No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restore the Password for Console Port Login

Restore the Password for Console Port Login

If you forget the password for logging in through the console port, use either of the following two methods to set a new password.

Logging In to the Switch Through STelnet or Telnet to Set a New Password

Telnet may bring security risks. You are advised to log in to the switch through STelnet V2.

Ensure that you have an STelnet/Telnet account and administrator rights. The following uses the command lines and outputs of logging in to the device using STelnet as an example. After logging in to the switch through STelnet, perform the following configuration.

# Take password authentication as an example. Set the password to Huawei@123.

<HUAWEI> system-view
[HUAWEI] user-interface console 0
[HUAWEI-ui-console0] authentication-mode password
[HUAWEI-ui-console0] set authentication password cipher Huawei@123
[HUAWEI-ui-console0] return
<HUAWEI> save

# Take AAA authentication as an example. Set the user name and password to admin123 and Huawei@123 respectively.

<HUAWEI> system-view
[HUAWEI] user-interface console 0
[HUAWEI-ui-console0] authentication-mode aaa
[HUAWEI-ui-console0] quit
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin123 password irreversible-cipher Huawei@123
[HUAWEI-aaa] local-user admin123 service-type terminal
[HUAWEI-aaa] return
<HUAWEI> save

Clearing the Lost Password Through the BootROM/BootLoad Menu

NOTE:

If the switch has two MPUs, remove the standby MPU before performing the following operations. After performing the following operations, install the standby MPU and run the save command to ensure the consistent configuration on the active and standby MPUs.

If multiple switches are stacked, power off the member switches. After completing the following operations on the master switch, run the save command to ensure that the configurations on the master switch can be synchronized after other member switches are started.

You can use the BootROM/BootLoad menu of the switch to clear the lost password for console port login. After starting the switch, set a new password and save your configuration. Perform the following steps.

  1. Connect the terminal to the console port of the switch and restart the switch. When the following message is displayed, press Ctrl+B or Ctrl+E immediately and enter the password to enter the BootROM/BootLoad menu.

    Press Ctrl+B or Ctrl+E to enter BootLoad menu ... 2
    password:      //Enter the BootLoad password.
    NOTE:

    Some models of fixed switches allow you to enter the BootROM/BootLoad menu by pressing Ctrl+E. Perform operations as prompted on the screen.

    The command outputs of different versions on different devices may be different. Therefore, the command outputs on your device may be different from that provided in this example.

    The default BootLoad password is Admin@huawei.com.

  2. Select Clear password for console user on the BootROM/BootLoad menu to clear the password for console port login.
  3. Select Boot with default mode on the BootROM/BootLoad menu to start the switch as prompted.
    NOTE:

    Do not select Reboot; otherwise, the password cannot be cleared.

  4. After the switch is started, log in through the console port. Authentication is not required when you log in. Set a password as prompted after login. (In V200R009 and later versions, the authentication mode for console port login is non-authentication after the device starts, and the system does not ask you to configure an authentication password.)
  5. You can set an authentication mode and password for the console user interface according to service requirements.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 10890

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next