No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BootLoad Menu

BootLoad Menu

During the switch startup, when the message "Press CTRL+B to enter BootLoad menu:" is displayed, the BootLoad is started, press Ctrl+B within 3 seconds to access the BootLoad menu.

Before accessing the BootLoad menu, you must enter a password, which prevents unauthorized users from accessing the BootLoad menu and ensures switch security. The default BootLoad password is Admin@huawei.com. To change the BootLoad password, see Modifying the BootLoad Password.
NOTE:

If you enter incorrect passwords three consecutive times, the switch restarts. You are advised to set a new BootLoad password when accessing the BootLoad menu for the first time.

If you press Ctrl+T when the device displays "Press CTRL+T to Start Memory Test", "Press CTRL+T for full memory test" or "Press [Ctrl+T] to entry diag menu" during the device startup process, the device will perform a memory check.

After you enter the correct BootLoad password, the following BootLoad menu is displayed:
Press CTRL+B to enter BootLoad menu: 3                                       
                                                                                
Password:     //Enter the BootLoad password.

        BootLoad Menu

     1. Boot with default mode
     2. Enter ethernet submenu
     3. Modify Flash description area
     4. File system submenu
     5. Enter password submenu
     6. Clear password for console user
     7. Reboot

Enter your choice(1-7): 
Table 11-1  BootLoad menu

Item

Description

1. Boot with default mode

Starts the switch based on information set in 3. Modify Flash description area, without passing through the uBoot stage.

2. Enter ethernet submenu

Displays the Ethernet port submenu. In this submenu, you can download files including the configuration file to the switch flash memory using the Ethernet port.

This operation features fast file transfer, but you must preconfigure a file server and set network parameters to ensure that the route between the switch and the file server is reachable.

3. Modify Flash description area

Displays the flash description submenu. In this submenu, you can view and change the startup configuration. When upgrading the system software using the BootLoad menu, you can access this submenu to set the system software, configuration file, and patch file.

4. File system submenu

Displays the file system submenu. In this submenu, you can manage and maintain the file system.

5. Enter password submenu

Enters the password submenu. In this submenu, you can change the BootLoad password or restore the default BootLoad password.

6. Clear password for console user

Allows you to delete the password for login using the console port. In this submenu, you can delete the password for logging in to the switch using the console port when you forget the password. After the password is deleted, you can log in to the switch using the console port without authentication.

7. Reboot

Restarts the switch using the system software and configuration file set in 3. Modify Flash description area. The switch startup goes through the BIOS and BootLoad stages.

If the modified parameters affect the initialization before the BootLoad menu is displayed, access this submenu to restart the BootLoad and then start other components.

Shortcut key

The BootLoad menu provides two shortcut keys: Ctrl+M and Ctrl+J. The two shortcut keys can be used in any BootLoad menu to provide functions similar to Enter.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 10979

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next