No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
File System Submenu

File System Submenu

In the BootLoad menu, select 4 to access the file system submenu.

        BootLoad Menu

     1. Boot with default mode
     2. Enter ethernet submenu
     3. Modify Flash description area
     4. File system submenu
     5. Enter password submenu
     6. Clear password for console user
     7. Reboot

Enter your choice(1-7): 4
        Flash Submenu

     1. list flash files
     2. delete flash files
     3. rename flash files
     4. format flash
     5. Return

Enter your choice(1-5):  
Table 11-3  File system submenu

Item

Description

1. list flash files

Displays all files in the flash memory.

2. delete flash files

Deletes files in the flash memory.

NOTE:

Before you select 2 in the file system submenu, select 1 to view existing files on the switch to obtain names of files to be deleted.

3. rename flash files

Renames files.

NOTE:

Before you select 3 in the file system submenu, select 1 to view existing files on the switch to obtain names of files to be renamed.

4. format flash

Formats the flash memory.

If a bad sector exists on the flash memory or the flash memory fails, format the flash memory to rectify the fault. If the fault persists, contact technical support personnel.

NOTICE:

After the flash memory is formatted, the switch cannot start. You need to reload the system software. Therefore, exercise caution before formatting the flash memory.

5. Return

Returns to the BootLoad menu.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 10747

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next