No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Basic Configuration

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, ISSU Configuration, BootLoad Menu Operation.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restore the Password for Telnet Login

Restore the Password for Telnet Login

If you forget the Telnet login password, log in to the switch through the console port and set a new password for Telnet login.

NOTE:

The following uses the command lines in V200R008C00 as an example.

# Logging in to the device through the console port.

  1. Connect the DB9 female connector of the console cable to the serial port (COM) on the PC, and connect the RJ45 connector to the console port on the device.
  2. Start the terminal emulation software on the PC. Create a connection, select the connected port, and set communication parameters.
    • Baud rate : 9600
    • Data bits : 8
    • Stop bits : 1
    • Parity : None
    • Flow Control : None
  3. Click Connect. Enter or configure the login password as prompted to log in to the switch.

# Take password authentication for VTY0 login as an example. Set the password to Huawei@123.

<HUAWEI> system-view
[HUAWEI] user-interface vty 0
[HUAWEI-ui-vty0] protocol inbound telnet   //By default, switches in V200R006 and earlier versions support Telnet, and switches in V200R007 and later versions support SSH.
[HUAWEI-ui-vty0] authentication-mode password
[HUAWEI-ui-vty0] set authentication password cipher Huawei@123
[HUAWEI-ui-vty0] user privilege level 15
[HUAWEI-ui-vty0] return
<HUAWEI> save

# Take AAA authentication for VTY0 login as an example. Set the user name and password to admin123 and Huawei@123 respectively.

<HUAWEI> system-view
[HUAWEI] user-interface vty 0
[HUAWEI-ui-vty0] protocol inbound telnet   //By default, switches in V200R006 and earlier versions support Telnet, and switches in V200R007 and later versions support SSH.
[HUAWEI-ui-vty0] authentication-mode aaa
[HUAWEI-ui-vty0] quit
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin123 password irreversible-cipher Huawei@123
[HUAWEI-aaa] local-user admin123 service-type telnet
[HUAWEI-aaa] local-user admin123 privilege level 15
[HUAWEI-aaa] return
<HUAWEI> save
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065643

Views: 10769

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next