No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Interface Management

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Interface Description

Configuring an Interface Description

Context

To facilitate switch management and maintenance, you can configure interface descriptions. An interface description can contain:

  • The switch where the interface is located
  • The interface type
  • The remote device

For example, a description of To-[DeviceB]GE-1/0/1 indicates that an interface of this switch is connected to GE1/0/1 of device B.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run description description

    A description is configured for the interface.

    By default, an interface has no description.

    The interface description is displayed from the first non-space character.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065645

Views: 8806

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next