No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Configuration Guide - Interface Management

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Interval of Collecting Traffic Statistics on an Interface

Configuring the Interval of Collecting Traffic Statistics on an Interface


When the NMS obtains interface traffic statistics through the MIB tables iftable and ifxtable, the time for querying interface traffic statistics in real time is long. When the device has a large number of interfaces, the query efficiency of the NMS is low. To resolve this issue, switches can be configured to periodically collect traffic statistics on interfaces. In this case, the NMS can directly obtain traffic statistics collected on interfaces, improving the query efficiency.


  1. Run system-view

    The system view is displayed.

  2. Run set if-mib sample-interval interval-value

    The interval for collecting traffic statistics on an interface is configured.

    The default period is 60 seconds.

Updated: 2019-04-08

Document ID: EDOC1100065645

Views: 8738

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next