No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Traffic Policing

Traffic Policing

Traffic policing controls the rate of traffic entering a network within a specified range by metering traffic and taking punitive actions on excess traffic, conserving network resources.

Implementation of Traffic Policing

Figure 4-4  Traffic policing components

As shown in Figure 4-4, traffic policing involves the following components:

  • Meter: uses the token bucket mechanism to measure network traffic and sends the result to the marker.

  • Marker: colors packets green, yellow, or red based on the metering result received from the meter.

  • Action: performs actions based on packet colors. The following actions are defined:

    • Pass: forwards the packets that conform to the limit.

    • Re-mark + pass: changes the local priorities of packets that exceed the limit and forwards the packets.

    • Discard: drops the packets that exceed the limit.

If the rate of a packet stream exceeds the limit, the system lowers the priority of the excessive packets in the stream before forwarding them or discards the packets. By default, the system forwards green and yellow packets, and discards red packets.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18526

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next